WORKSHOP CLUTCH/THROTTLE CABLE KIT
SKU:
VWK005
$296.72
Availability
In Stock
Details
Box dimensions H 220mm W 240mm L 460mm
We recommend our VT13 Bird Caging tool to make the bonds with your nipple much stronger.
Please note: The low friction PTFE Liner is now included inside the conduit to make it easier to make the cables!
Downloads
VWK005_WorkshopClutchAndThrottleCableKit.pdf
| VWK005_WorkshopClutchAndThrottleCableKit.pdf |
Download
|
Frequently Asked Questions
There are no FAQs for this product. Click ask a question to ask your question.
Ask a Question
Write Your Own Review
Related Products
-
-
BARREL NIPPLE 6.0mm O.D.x 5.0mm (1.9mm)BN575/556.00mm O.D., 5.00mm TALL. BRASS FINISH. 1.90mm BORE, SUITABLE FOR 1.50mm WIRE.$0.38 -
2mm 1x19 GALVANISED WIRE STRAND (Per M)P19/2Priced per metre. Tolerance on the O.D.+/- 8%. Minimum breaking load 3.23 KN., Safe working load...$3.71 -
5mm CONDUIT W/TEFLON LINER (Per metre)LB1TSOuter conduit with a 5mm O.D.
Includes a low friction teflon liner and suitable for wire up...As low as $7.48 -
LOOSE BARREL NIPPLE 8mm O.D. X 9mmBN89LZinc plated, Bore 3.8mm, Larger hole 6.6mm to suit TN124 Please note this part is meant to be...$0.67 -
-
-
-
-
-
FERRULE FOR LB3TS CONDUIT 6.2mm O.D.NOSEF101Stepped Ferrule - 6.2mm O.D. nose and 8mm larger diameter. The length of the short nose section is...$0.48 -
WIRE, ROPE AND HOSE CUTTERWC6High carbon steel parrot nosed cutters are perfect for cutting cable wire, conduit and brake hose,...$31.31 -
-
-
-
BARREL NIPPLE 6mm O.D.x10mm, 2.10mm BOREBN610Outer diameter 6.00mm
Height 10.00mm
Bore 2.10mm
Brass finish$0.38 -
1.5mm 7x7 GALVANISED WIRE ROPE (Per M)R77/1Priced per metre | Tolerance on the O.D.+/- 8%. | Tensile strength: 1770 N/MM2 | ...$2.95 -
7mm CONDUIT W/ TEFLON LINER (Per metre)LB3TSOuter conduit with a 7mm O.D.
Includes a low friction teflon liner and suitable for wire up...As low as $8.45 -
-
-
-
-
CABLE INNER WIRE BIRD CAGING TOOLVT13Tool for forming a 'birdcage' when soldering nipples to control cable inner wires. Suitable for...$203.42 -
LOOSE BARREL NIPPLE 10mm O.D x 10mmBN1010LZinc plated, Bore 3.8mm Use TN24 or TN24A trumpet nipple soldered to wire
$0.55 -
NEOPRENE BOOT 8mm I.D.M5931NEOPRENE BOOT WITH AN 8mm I.D. TO FIT OVER ADJUSTERS AND END FITTINGS OF UP TO 8mm A/F HEX OR 9mm...$0.74 -
-
ALLOY ADJ SCREW M8 x 1.25 x 25mmA8125/25Hole size for ferrule: 6.6mm. Length of threaded section: 10mm$3.05 -
-
STEEL ADJUSTER SCREW M6 x 1.0 X 32mmA6100/32/1M6 x 1.0 X 32mm THREAD. SUITABLE FOR A 6mm DIA. FERRULE.$2.09 -
STEEL ADJUSTER SCREW M6 x 1.0 X 25mmA6100/25M6 x 1.0 X 25mm THREAD. SUITABLE FOR A 6mm DIA. FERRULE.$2.09