Call Us +1 888-367-4581

Welcome to Venhill USA!

My Cart

Cart $0.00

You have no items in your shopping cart.

Venhill Universal Split Dual Throttle Motorcycle Cable Kit with Junction Zoom

Venhill Universal Split Dual Throttle Motorcycle Cable Kit with Junction

Be the first to review this product

The Venhill Universal Dual Throttle Cable Kit is a high-quality, "build-your-own" cable kit suitable for generally any motorcycle throttle application where the cable connects to the grip and then splits to actuate two carburettors or throttle bodies.

Availability: In stock

$44.98

No Hassle Refund Policy
Read more...

Most in stock items ship immediately

Free shipping on orders of $100 or more
(USA only)

Got questions?
Contact us!

Product Description

Details

The Venhill Universal Split Dual Throttle Cable Kit with Junction is a high-quality, "build-your-own" cable kit suitable for generally any motorcycle throttle application where the cable connects to the grip and then splits to actuate two carburettors or throttle bodies.

This is a practical, durable kit for building your own throttle cables for a custom chopper, a unique classic, a show project, or a vintage race bike.

The conduit is spiral wound steel covered with tough black PVC.

The inner liner is Teflon™ for smooth action and zero maintenance.

The wire is galvanized steel for long life and easy soldering.

The wires will need to be cut to length and the required nipples soldered into place. The ferrules and adjusters are a snug fit. They may be bonded into place if preferred, or you can use a center punch to make a small indention in the side. You will need a basic soldering kit and basic soldering skills to solder the nipple into place.

The kit includes:

  • Upper/grip conduit is 1.5 meters (4.9 feet/4 feet 11 inches/59 inches) of 5mm OD black PVC coated, spiral wound, Teflon lined outer conduit
  • Upper/grip wire is 1.75 meters (5.75 feet/5 feet 9 inches/69 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand)
  • Lower/engine conduit is 0.5 meters (1.64 feet/1 foot 7.7 inches/19.7 inches) of 5mm OD black PVC coated, spiral wound, Teflon lined outer conduit
  • Lower/engine wire is 0.75 meters (2.46 feet/2 feet 5.5 inches/29.5 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand)
  • 4 ferrules, 5.5mm OD
  • 4 ferrules, 5mm OD
  • 4 ferrules, 7mm OD
  • 1 throttle grip adjuster screw with nut, M10 x 1.25 x 22mm
  • 1 alloy adjuster screw with nut, M8 x 1.25 x 25mm
  • 1 steel adjuster screw with nut, M6 x 1.00 x 20mm
  • 2 steel adjuster screws with nuts, M6 x 0.75 x 15mm
  • 3 brass barrel nipples, 6mm DIA x 4.2mm (1.7mm bore)
  • 3 brass barrel nipples, 5mm DIA x 7.5mm (1.9mm bore)
  • 3 brass barrel nipples, 5.75mm DIA x 5.5mm (1.9mm bore)
  • 1 brass ball nipple, 5mm DIA
  • 1 brass ball nipple, 6mm DIA
  • 1 tapered neoprene boot, 10mm > 4.5mm ID
  • 4 neoprene boots, 7mm ID
  • 1 splitter assembly, 48mm travel

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register