Call Us +1 888-367-4581

Welcome to Venhill USA!

My Cart

Cart $0.00

You have no items in your shopping cart.

Venhill Universal Motorcycle Dual Throttle Cable Kit Zoom

Venhill Universal Motorcycle Dual Throttle Cable Kit 92 Inch

Be the first to review this product

The Venhill Universal Dual Throttle Cable Kit 92 Inch is a high-quality, "build-your-own" cable kit suitable for generally any motorcycle throttle application with a "push-pull" style, two cable throttle and a maximum length of 92 inches.

Availability: In stock

$59.98

No Hassle Refund Policy
Read more...

Most in stock items ship immediately

Free shipping on orders of $100 or more
(USA only)

Got questions?
Contact us!

Product Description

Details

The Venhill Universal Dual Throttle Cable Kit 92 Inch is a high-quality, "build-your-own" cable kit suitable for generally any motorcycle throttle application with a "push-pull" style, two cable throttle and a maximum length of 92 inches.

This is a practical, durable kit for building your own throttle cables for a custom chopper, a unique classic, a show project, or a vintage race bike.

The conduit is spiral wound steel covered with tough black PVC.

The inner liner is Teflon™ for smooth action and zero maintenance.

The wire is galvanized steel for long life and easy soldering.

The ends of the inner wires are fitted with a barrel nipple (nominally 6mm dia x 5mm). The opposite end will need to be cut to length and the required nipple soldered into place. The ferrules and adjusters are a snug fit. They may be bonded into place if preferred, or you can use a center punch to make a small indention in the side. You will need a basic soldering kit and basic soldering skills to solder the nipple into place.

The throttle kit includes:

  • 2 x 2.35 meters (7.7 feet/7 feet 8.4 inches/92.5 inches) of 6mm OD black PVC coated, spiral wound, Teflon lined outer conduit (LB2TS)
  • 2 x 3 meters (9.8 feet/9 feet 6 inches/118.1 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand) (R77/1)
  • 1 2-piece plastic angled wire guide (2491-02-3787 + 2491-02-3788)
  • 1 ferrule bend with swivel nut, throttle open, "Honda" (FB10125)
  • 1 ferrule bend with swivel nut, throttle close, "Honda" (FB8)
  • 1 ferrule bend with mounting tab, throttle open, "Suzuki" (FB13)
  • 1 ferrule bend with swivel nut, throttle close, "Suzuki" (FB14)
  • 2 ferrule bends, zinc coated (FB22W)
  • 2 ferrules, 5mm OD nose (F82)
  • 2 ferrules, 6.5mm OD nose (F89)
  • 2 ferrules, 5.5mm OD nose with groove (F82G)
  • 2 6mm x 1.00 x 25mm adjusters (2x A6100/25 + 4x LN6100)
  • 1 tapered neoprene double boot (2491.02.3795)
  • 4 neoprene adjuster boots (M5931)
  • 2 brass barrel nipples, 6mm DIA x 10mm (2.1mm bore) (BN610)
  • 2 brass barrel nipples, 6mm DIA x 8mm (2.1mm bore) (BN608)
  • 2 solderless barrel nipples, 6mm DIA x 8mm (BNS6)
  • 2 solderless barrel nipples, 5mm DIA x 7.5mm (BNS575)
  • 2 tab washers (TW6)

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register