The Venhill Universal Shop Multi Throttle Cable Kit is a high-quality, "build-your-own" kit suitable for building multiple throttle cables for generally any motorcycle application.

This is a practical, durable kit for building multiple throttle cables for custom choppers, unique classics, show projects, or vintage race bikes.

The conduit is spiral wound steel covered with tough black PVC.

The inner liner is Teflon™ for smooth action and zero maintenance.

The wire is galvanized steel for long life and easy soldering.

The ferrules and adjusters are a snug fit. They may be bonded into place if preferred, or you can use a center punch to make a small indention in the side. You will need a basic soldering kit and basic soldering skills to solder the nipple into place.

The kit includes:

• 5 meters (15 feet) of 5mm OD black PVC coated, spiral wound conduit
• 5 meters (15 feet) of Teflon liner for 5mm conduit
• 5 meters (15 feet) of 1.5mm OD galvanized steel wire (7 x 7 strand)
• 10 ferrules, 1/4" OD
• 20 ferrules, 5.5mm OD
• 1 mid-adjuster, 6mm x .75 x 20mm
• 5 brass barrel nipples, 5.75mm DIA x 5.5mm
• 20 brass carb nipples, 3mm DIA x 3mm
• 2 general use neoprene boots, 14mm ID
• 10 neoprene adjuster boots, 7mm ID